The 3 x 3 Hot Farm turbocharger is a clone of our legendary 3 x 3 Super Farm turbocharger with one less blade. Extensive testing at the dyno and on the track proved that the 7 blade CEA� compressor wheel moves too much air down low on a 466 CID which creates compressor surge. We corrected the issue by going with a 6 blade design. The 6 blade CEA� compressor wheel still makes a lot of steam; it just makes it at a higher RPM. This is a good fit for the Hot Farm tractors that run a higher RPM while going down the track.
PTE's Hot Farm Class Legal Pulling Turbochargers feature the following:
� Exclusive Competition Engineered Aerodynamics (CEA�), CNC-machined 2618-forged aluminum 6 blade compressor wheel
� Air-cooled, dual ceramic ball-bearing center housing rotating assembly (CHRA) for reliability and performance
� Greater efficiency than other aftermarket units
� Can lug down below 1700 rpm and stay in at the end of the track
� Capable of higher boost pressure with less heat
� Offered with or without Map Width Enhancement (MWE)
� Turbine housing options:
�-T4 divided .98 A/R with 4� OD (outer diameter) V-band discharge
�-T4 divided 1.12 A/R with 4� OD (outer diameter) V-band discharge
�-T4 divided 1.28 A/R with 4� OD (outer diameter) V-band discharge
� Impressive power to help complete your full pull
� Gains of up to 120 horsepower when using our Hot Farm turbocharger compared to a competitor�s class legal 3X3 turbocharger
� Ideal for 466CID-550CID diesel engines typically found in the Hot Farm classes
� Custom units are available upon request (just send us a copy of the class rules)